| Standard
Industrial PC Chassis with connector enclosure providing access to 128
channels on 8 by 37Way D-Types. Clock and Trigger input on 9 Way D-Type.
|
Detail
of rack mount panel featuring 16 differential inputs on dual pin LEMO®
connectors; Clock and Trigger input and tee to output on single pin
LEMO® connectors.
|
| Further
examples of 19” rack mount termination options. - at the top is a multi
way clock and trigger distributor module to connect and synchronise
multiple chassis. Underneath is a 32 channel BNC connector panel.
|
| Signal
Termination on CompactPCI can be very simple. Shown here are 32 channels
of Analog Input signals connected directly to 2 by 37 Way D-Types on the
front panel. The inputs are overvoltage protected, and in addition a wide
common mode range (+/-90V) opertion is available. Opto isolated clock in/
clock out, trigger in/ trigger out is provided by the four Lemo
connectors.
|
| This
example features 48 channels at 2.5MSPS/channel, with inputs on individual
BNC connectors on the front panel. Multiple chassis can be synchronised
via the 19” clock distributor module shown above.
|
